1. Reliable quality
The whole machine is made of 304 material, good material selection, fine workmanship, and its quality is better than that of the manufacturer. Its life span is extended by about 3-5 years. It is reliable in quality, durable, long life, high-yield and efficient, and meets environmental protection, low carbon, and energy consumption. Low work requirements, reliable equipment.

2. Outstanding advantages
1) It is made of polished 304 stainless steel, no burr, and more sanitary;
2) High sieving efficiency, accurate sieving accuracy, sieving fine to 500 mesh or 0.028mm, and filtering up to 5 microns;
3) Fully enclosed structure + bouncing ball clearing device, the mesh will not be blocked and the powder will not fly.

3. The price is cheap
Dayong can independently undertake equipment production, sales and other services. The equipment has excellent workmanship and mature technology. The factory equipment is directly sold to customers, reducing the intermediate price difference and eliminating cost waste. Therefore, the equipment quotation will be more economical.

4. High-quality service
Manufacturers always regard "customer as life", check equipment quality, after-sales service and other aspects, regard equipment quality and after-sales service as the lifeblood of the enterprise, and provide customers with one-stop pre-sales guidance, after-sales installation, commissioning, operation, and operation A series of services such as guidance, repair and maintenance.

First, reduce the service life of the vibration motor.
When the linear vibrating screen is used, the uneven feeding or excessive feeding at one time will suddenly increase the load of the vibrating motor, cause damage to the motor, and reduce the service life of the motor, which is more serious.

Second, the screen is broken
When the linear vibrating screen is used, the feeding is uneven or the user feeds too much at one time, which exceeds the pressure that the screen can withstand. The screen is seriously stressed, which will cause the screen to be damaged faster.

Third, the screening efficiency is low.
When the linear vibrating screen is in operation, too much material is put in at one time, which exceeds the screening load that the screening machine can withstand, so that the material is discharged from the discharge port before it can be screened, causing too much fine material to be discharged from the coarse material port. Will greatly reduce the screening efficiency.
When we use the linear vibrating screen, we must ensure the uniformity of the feed. This not only guarantees the work efficiency, but also reduces the damage to the vibrating screen. At the same time, don't forget to regularly check and repair the vibrating screen.

1. Remove the transportation support:
In order to avoid damage to the equipment during transportation, the vibrating screen manufacturer will install three supporting frames before the newly manufactured circular vibrating screen is delivered. The user removes the support frame before starting. Otherwise, the rotary vibrating screen cannot work normally. The mounting position of the support frame is indicated by a mark, and the general position is close to the vibration spring.
2. Check the tightening of the vibrating screen accessories:
Before use, please carefully check the firmness of the vibrating motor, locking ring, damping spring and other components; check the vibrating screen fasteners, the bolts of the whole machine have been tightened in place before leaving the factory, but the user needs to use it for a period of time. The bolts of the machine are tightened twice, and the bolts can be loosened under stress. If it is found to be loose, it should be tightened in time.
3.When screening dry materials, connect hose or canvas soft connections to the inlet and outlet devices of the circular vibrating screen to prevent potential leakage or dust overflow.
4.After the feeding is completed, let the circular sieving machine continue to run for about 5 minutes, so that all the screens and bottom materials are cleaned to avoid residual materials remaining in the machine

1. Always keep the chemical vibrating screen clean, and check whether the screen and other accessories are damaged during the handover.
2. When the bearing is damaged, if the bearing is damaged, it should be replaced with a new one.
3. When assembling and disassembling the parts, you can't hit them directly with a hammer, you must have a suitable cushion to lift them, or hit and disassemble with a mallet.
4. The motor needs to change the lubricating oil regularly, which is also a precaution for prolonging the life of the vibration motor. In order to reduce motor burning caused by forgetting to add lubricating oil, some manufacturers now use oil-filled motors.
5. The damaged filter, rubber ring and vibration motor should be replaced in time to avoid damage to the normal operation of the chemical vibration filter.
Many things are actually very small, but the impact on the screening equipment is not small at all. Everyone must pay more attention when using them.

1. The feed must be uniform: the feed amount is subject to the processing of the equipment. Too much material at one time will hinder the normal movement of materials on the screen surface, which will not only make the screen fatigue loose, but also greatly reduce the amount of material handled. Giving a large amount of materials at one time will cause the load of the motor that is in unbalanced operation to increase suddenly, causing damage to the motor and reducing the life of the motor. If the feed volume does not reach the processing capacity of the equipment, it wastes energy and reduces output;

2. Feeding methods with strong impact force must be equipped with a buffer hopper. The material directly impacts the mesh surface, which not only consumes the exciting force generated by the vibration source, but also easily causes damage to the mesh surface and screen fatigue, which affects the output and screening. .Quality of filtration;

3. Please always observe whether the working net becomes loose, please tighten the net again.

1) The nature of the sample itself: the moisture content and viscosity of the sample, the shape of the sample, and the proportion of difficult-to-screen particles in the sample;
2) The structural parameters of the ultrasonic vibrating screen: the material and type of the screen, the screen length, and the effective area of the screen surface;
3) Motion parameters of ultrasonic vibrating screen: vibration type, amplitude, vibration frequency.