Trommel screen faults and corresponding solutions

1. Noise caused by loose equipment bolts

Solution: Retighten bolts or other fasteners;

2. Wrong rotation direction caused by wrong connection of motor power cable

Solution: replace the power cable in the junction box;

3. The problem of click start delay caused by motor overload or excessive conveying capacity

Solution: readjust the conveying volume;

4. Insufficient ventilation in the gearbox or lack of lubricant make the gearbox hot

Solution: check and adjust the heat dissipation of the vent and add lubricant;

5. Motor heating problem

Solution: clean the radiator of the motor, check whether the fan impeller works normally, and ensure smooth air circulation; Reduce load; Fasten the connection; Reconnect the wiring after inspection.

6. The screen hole is blocked so that the drum screen cannot operate normally

Solution: Timely clean up the garbage blocked by the sieve hole to reduce the blockage.

If you have other questions or don't understand anything, please contact us, and the professionals of Dayong Vibration Equipment Co., Ltd. will provide you with screening scheme.