Widely Used Incline Mining Linear Vibration Screen With Double Motor
Xinxiang Dayong Co., Ltd. produces and sells Widely Used Incline Mining Linear Vibration Screen With Double Motor, and the motor makes the vibration exciter rotate rapidly through the tire coupling. The screen box realizes continuous forced circular motion under the action of strong centrifugal force. Under the action of the screen box, the material is continuously thrown forward on the screen. They are classified as thrown, and particles smaller than the mesh size are screened out as they fall, so that the classification of substances can be achieved.
Xinxiang Dayong Co., Ltd. produces and sells Widely Used Incline Mining Linear Vibration Screen With Double Motor, and the motor makes the vibration exciter rotate rapidly through the tire coupling. The screen box realizes continuous forced circular motion under the action of strong centrifugal force. Under the action of the screen box, the material is continuously thrown forward on the screen. They are classified as thrown, and particles smaller than the mesh size are screened out as they fall, so that the classification of substances can be achieved.
Wide range of applications. The linear vibrating screen uses a vibrating motor as the vibration source, and the material rolls while moving in a straight line. The material enters the entrance evenly, and then passes through the screen to produce materials of different sizes, which are discharged from different doors. It is suitable for low consumption, high output, simple structure, convenient maintenance, fully enclosed structure, non-scattering powder.
Linear vibrating screen is mainly composed of eccentric block vibrator, screen box, motor and supporting device. Through the flexible coupling, the motor drives the eccentric mass of the vibrator at high speed, generating centrifugal force. Then, the material in the inclined screen surface is continuously cast by the force generated by the screen box to achieve the purpose of classification.
The material is thrown or jumped straight forward on the screen surface, so as to achieve the purpose of material screening and classification. The suitable particle size is 0.074-5mm, the water content is less than 7%, and various powder or granular dry sieve non-stick materials. The maximum feed size does not exceed 10mm.
