Trial operation method of high-efficiency three-dimensional vibrating screening machine
This article explains the operation method of trial operation after the arrival of the vibrating screen equipment
Xinxiang Dayong Vibration Equipment Co., Ltd. focuses on the production of screening and conveying machinery. It has mature technology and various models. It has its own source factory. If you have product-related questions, or want to know more about rotary vibrating screens, please contact us. Dayong will give you the most suitable solution.
Trial operation of vibratory sieve machine
1. Turn on the power switch and run idly for 20-30 minutes. The rotation of the motor must run in the direction of the red arrow marked on the frame of the rotary vibrating screen. If the direction is wrong, please adjust the three-phase power supply.
2. It should be confirmed that the vibration motor is running within the rated current. When starting to run, especially in low temperature situations, the current will be slightly higher, but within 20-30 minutes, it will be reduced to the rated current value.
3. There should be no abnormal sound when the screen machine is working. If there is any abnormal sound, it should be stopped quickly and checked. The occurrence of abnormal sound is generally caused by loose fasteners, especially when it is transported or disassembled and then assembled. Great attention should be paid to the tightening of each component. There is an instantaneous resonance area (1-2 seconds) when the screen machine is started and stopped. At this time, the amplitude and noise will increase significantly, which is a normal phenomenon.
4. After the sieve machine is running normally, a small amount of material can be put into the sieve machine through the feeding port, and then slowly increase to the required and bearable feeding amount. adjustment, so that the efficiency of the screen machine reaches the best state.
5. The general materials of this series of screening machines are not equipped with a bouncing ball device, which can meet the screening requirements. Special materials need to be equipped with a bouncing ball device to be designed and installed separately. At this time, the noise of the screen machine will increase.
Xinxiang Dayong Vibration Equipment Co., Ltd. focuses on the production of screening and conveying machinery. It has mature technology and various models. It has its own source factory. If you have product-related questions, or want to know more about rotary vibrating screens, please contact us. Dayong will give you the most suitable solution.
