Three-dimensional rotary vibrating screen is installed on the screen/Sieving Machine Production factory
Explain the screen installation method and steps of the three-dimensional vibrating screen for everyone. The screen installation of the three-dimensional vibrating screen has been completed. It should be noted that the contact between the sealant strip and the screen frame and the mesh frame should be smooth without distortion. Dust cover and screen frame should be placed flat.
Welcome to consult Xinxiang Dayong Vibration Equipment Co., Ltd., specializing in the production of rotary vibrating screens to meet the needs of users.
1. Installation of the bottom frame: Note that the sealing strip should be installed neatly, and there should be no distortion or unevenness. After the bottom frame rubber strip is installed, it should be flatly placed on the base without deviation, and then use the lashing ring to tighten the base and the bottom frame;
2. Installation of the sub-net grid: the main net is on the bottom, the sub-net is on the top, use the netting tool to firmly fasten the sub-net on the main net, and then use the sealing tape to seal the edges of the sub-net and the main net;
3. Installation of the dust cover: first install the sealing strip on the screen frame, then place the dust cover flat on the screen frame equipped with the sealing strip, and finally use the ring to fasten it.
Through the above steps, the screen installation of the three-dimensional vibrating sieve has been completed. It should be noted that the contact between the sealant strip and the screen frame and the mesh frame should be smooth without distortion. Dust cover and screen frame should be placed flat.
Welcome to consult Xinxiang Dayong Vibration Equipment Co., Ltd., specializing in the production of rotary vibrating screens to meet the needs of users.