The use and maintenance of DY rotary vibrating screen
1. This machine should be equipped with electrical protection devices.
2. In the early stage of the machine’s operation, check the anchor bolts at least once a day.
3. When the rotation direction of the motor does not meet the requirements, adjust the phase sequence of the power supply.
4. The motor should be well lubricated. Lithium-based grease (ZL-3) should be added every two weeks or so. When refueling, add an appropriate amount of lithium-based grease through the oil cup. When using sealed bearings, the motor does not have an oil cup installed.
5. After the machine has been running for 1500 hours, the bearing should be checked and replaced immediately if there is serious damage.
6. When the machine is used again after being stopped for a long time, the insulation resistance should be measured, which should be greater than 0.5 megohm for the measurement of a 500-volt megger.
