Glass powder rotary vibrating screen recommended rotary vibrating screen model and amplitude adjustment
Dayong Vibration Equipment Company recommends choosing DY-800 or DY-1000 stainless steel vibrating screen, and the specific number of layers can be determined according to the level of screening required. The recommended amplitude is 8-10 for the former and 10-12 for the latter. (specifically adjusted according to requirements).
About the amplitude and exciting force: You can adjust the phase angle of the weight block or increase or decrease the weight block to make the rotary vibrating screen generate different exciting force and amplitude, so as to change the movement trajectory of the material, so that the material can be obtained on the screen surface. Sufficient vibrating screening to meet the screening requirements of different materials and achieve the highest screening accuracy and output. The adjustment of the amplitude can be divided into two aspects: horizontal and vertical. The amplitude of the amplitude directly affects the screening output. The increase of the horizontal amplitude makes the material on the screen move faster to the edge, and the increase of the vertical amplitude makes the material on the screen stronger. Adjust the amplitude of the amplitude by adjusting the relative weights of the upper and lower weights. The amplitude of the amplitude should not exceed a certain range, otherwise the service life of the vibrating screen will be affected.
