Stainless Steel Single Layer Matcha Powder Vibro Separator Machine
The vibrating screen has the advantages of wide application range, high efficiency, large processing capacity and long life. It is widely used in chemical industry, construction, papermaking, food, mining, ceramics and other industries. The work of circular vibrating screen relies on the inertial force generated by inertial motors and eccentric plates. . It is a single-axis circular motion inertial vibrating screen. Eccentric hammer, considered as the source of vibration. Under the action of the vibrating body, the eccentric hammer can convert the rotary motion of the motor into three-dimensional motion of horizontal, vertical and inclined. The material of a certain particle size is transported to the screen to achieve the purpose of screening, and the products can be continuously and accurately separated and screened. The multi-layer use can screen out five groups of products with different particle sizes without inconsistent particle sizes. The parts in contact with the raw materials are made of stainless steel, and the screening will be safer and more efficient
Vibrating screen is a low-noise, high-efficiency high-precision fine powder screening machine. A quick screen change takes 3-5 minutes. Fully enclosed, suitable for screening and filtration of granules, powders
and mucus. The vibrating screen is excited by a vertical motor. The upper and lower ends of the motor are equipped with eccentric blocks, which convert the rotary motion of the motor into horizontal, vertical and inclined three-dimensional motion, and then transmit the motion to the material on the screen surface. Adjusting the phase angle of the upper and lower ends can change the movement trajectory of the materialon the screen surface. The mesh number of some materials is relatively small, such as the case of 40-80 mesh, so it is necessary to appropriately extend the trajectory of the running material on the screen surface to achieve a good screening effect. If the mesh number of the material is required to be more than 80 mesh, it is necessary to extend the running track of the material on it. The general angle is between 65 and 85.The adjustment of the motor angle, when we face the vibration motor, the upper counterweight is in the left-hand direction, and the lower counterweight is in the left-hand direction. The counterweight is in the right-hand direction, and the angle between the two counterweights facing your body is what we call the angle
