Sand Linear Vibro Screen Vibrating Sieve For River Sand /Grain Seed Linear Vibrating Screen Sieve Grading Machine
The Sand Linear Vibro Screen Vibrating Sieve For River Sand /Grain Seed Linear Vibrating Screen Sieve Grading Machine produced and sold by Xinxiang Dayong Company is a kind of powder material screening equipment. vibration source. There is an eccentric block on the upper and lower sides of the horizontal vibration motor and the exciter. The eccentric mass produces three-dimensional motion in horizontal, vertical and oblique directions. By adjusting the phase angle of the upper and lower eccentric blocks, the material on the screen can change the motion trajectory to achieve appropriate screening performance.
The Sand Linear Vibro Screen Vibrating Sieve For River Sand /Grain Seed Linear Vibrating Screen Sieve Grading Machine produced and sold by Xinxiang Dayong Company is a kind of powder material screening equipment. vibration source. There is an eccentric block on the upper and lower sides of the horizontal vibration motor and the exciter. The eccentric mass produces three-dimensional motion in horizontal, vertical and oblique directions. By adjusting the phase angle of the upper and lower eccentric blocks, the material on the screen can change the motion trajectory to achieve appropriate screening performance.
The motor rotates the exciter rapidly through the tire coupling. The screen box realizes continuous forced circular motion under the action of strong centrifugal force. Under the action of the screen box, the material is continuously thrown forward on the screen. They are classified as thrown, and particles smaller than the mesh size are screened out as they fall, so that the classification of substances can be achieved.
The material is thrown or jumped straight forward on the screen surface, so as to achieve the purpose of material screening and classification. The suitable particle size is 0.074-5mm, the water content is less than 7%, and various powder or granular dry sieve non-stick materials. The maximum feed size does not exceed 10mm.
