Rotary Vibrating Sieve For Dog Food/Vibro Separator
The dog food screening machine is a special equipment produced by Dayong Vibration Equipment Company for the sorting of dog food. The working principle is that the vibrating screen uses a vertical motor as the excitation source. The upper and lower ends of the motor are equipped with eccentric blocks, which convert the rotary motion of the motor into horizontal, vertical and inclined three-dimensional motion, and then transmit the motion to the material on the screen surface. Adjusting the phase angle of the upper and lower ends can change the movement track of the material on the screen surface. achieve the effect of sieving.
The dog food screening machine is a special equipment produced by Dayong Vibration Equipment Company for the sorting of dog food. The working principle is that the vibrating screen uses a vertical motor as the excitation source. The upper and lower ends of the motor are equipped with eccentric blocks, which convert the rotary motion of the motor into horizontal, vertical and inclined three-dimensional motion, and then transmit the motion to the material on the screen surface. Adjusting the phase angle of the upper and lower ends can change the movement track of the material on the screen surface. achieve the effect of sieving.
Instructions for use:
1. The material must be uniformly fed: the amount of feeding should meet the equipment processing. Too much material feeding at one time will hinder the normal movement of the material on the screen surface, which will not only easily make the screen mesh fatigued and loosen, but also greatly reduce the material handling capacity. Giving a large amount of material at one time will suddenly increase the load of the motor that is running unbalanced, causing damage to the motor and reducing the life of the motor. If the feeding amount cannot reach the processing capacity of the equipment, it will waste energy and reduce the output.
2. For the feeding method with strong impact force, a buffer hopper must be installed, and the material directly impacts the mesh surface, which not only consumes the exciting force generated by the vibration source, but also causes damage to the mesh surface and screen fatigue, which affects the output and screening. .Quality of filtration.
3. If the screening material is corrosive, please clean it up in time after use.
4. Please check whether the working net becomes loose, and make the net tight again
