Multi-layer Large Capacity Swing Sieve/flour sieve .3mm/cassava flour sieve/cake flour sieve/flour sieve mesh size
Multi-layer Large Capacity Swing Sieve/flour sieve .3mm/cassava flour sieve/cake flour sieve/flour sieve mesh size produced and sold by Xinxiang Dayong vibration equipment Co., Ltd. is dedicated to screening cassava powder and flour.For materials with relatively large meshes, the angle is usually in the range of five degrees to fifteen degrees, so that the materials can quickly move to the edge, thereby increasing the output.
DY-600 Vibrating Screen /DY-800 Vibrating Screen/DY-1000 Vibrating Screen
Price:598$-898$
The three-dimensional Multi-layer Large Capacity Swing Sieve/flour sieve .3mm/cassava flour sieve/cake flour sieve/flour sieve mesh size of the rotating vibrating screen is composed of a vertical motor as the excitation source. The upper and lower ends of the motor are equipped with eccentric blocks, which convert the rotating motion of the motor into horizontal, vertical, and inclined three-dimensional motions, so that the material expands and involutes on the screen surface, so this series of vibrating screens are called vibrating screens. The vibrating screen has the advantages of long material running track and high utilization rate of the screen surface. By adjusting the phase angle of the upper and lower ends of the hammer, the movement trajectory of the material on the screen surface can be changed. Screens of different sizes can be selected according to different materials.Some materials have relatively small mesh holes, such as 40 to 80 mesh, then we must appropriately extend the running track of the material on the screen surface to achieve a good screening effect.If the mesh of the material is required to be more than 80 meshes, then we need to extend the trajectory of the material on it, generally the angle is between 65 and 85.With Dayong’s range of vibratory circular sifters you will be able to sort your powders and aggregates with optimal efficiency.Our range is adapted to your production needs, with sizes ranging from 400 to 1800 mm in diameter with a small footprint from 0.125 to 1.85 m2.The DY range of vibrating sifters are manufactured according to your production requirements: in steel, 304L stainless steel, particularly for foodstuffs, or 316L stainless steel for the most corrosive products.
