High Efficiency Industry Pneumatic Feeding Granule Vacuum Conveyor For Salt
The high-efficiency industrial pneumatic salt particle vacuum conveyor produced and sold by Xinxiang Dayong vibration equipment Co., Ltd. has a wide range of applications, almost meets the feeding needs of all walks of life, and can be used for the transportation of salt particles in the chemical industry.The whole vacuum feeder is powered by a vortex air pump, which is oil-free, water-free and maintenance free.
ZKS-1 vacuum conveyor
When the start knob of the high-efficiency industrial pneumatic salt particle vacuum conveyor is turned to the “start” position, compressed air is supplied to the vacuum pump. The vacuum pump generates negative pressure to form a vacuum at the hopper. https://www.alibaba.com/product-detail/Carbon-powder-vacuum-conveyor-automatic-feeder_1600294065174.html?spm=a2700.galleryofferlist.normal_offer.d_title.27f21435k86ANEThe loose salt particles are transported to the hopper of the feeder through the pipeline. The filter completely separates the salt particles from the vacuum pump to prevent the small particles in the salt particles from entering the vacuum pump to pollute the atmosphere. When the suction time is up or the material level gauge acts, the control system cuts off the source and the vacuum pump stops working. When the silo door is opened (the time delay relay starts timing), the salt particles fall into the hopper of the equipment. At the same time, the filter is cleaned by pneumatic back blowing air circuit and stopped after 2 ~ 3S. After the delay time expires, the silo door is closed, and the vacuum pump is supplied with air again. Repeat this cycle until the knob is turned to the “stop” position.