Fault Analysis of Ultrasonic Rotary Vibrating Screen Transducer
The ultrasonic vibrating screen produced by Dayong Vibration Equipment Co., Ltd. is based on the ordinary rotary vibrating screen with an ultrasonic transducer system added. The ultrasonic transducer system makes the screen vibrate at high frequency. , It is used when the production process requires high output. And while achieving high-precision, high-mesh sieving, it can control a narrow particle size range. At present, it has been successfully applied to fine materials of 200 mesh to 600 mesh.
Ultrasonic transducer is the core equipment of ultrasonic rotary vibrating screen, which can convert ordinary electric energy into ultra-high frequency ultrasonic (18 kHz) electric energy. During daily use, it may happen that the ultrasonic vibrator gets damp, the transducer vibrator catches fire, and ceramic materials Crack, vibrator degumming, etc.
If you have any questions about the ultrasonic vibrating screen, you can contact us, and the professional technicians of Dayong Company will give you the best solution.
The ultrasonic vibrating sieve produced by Dayong Vibration Equipment Co., Ltd. is based on the ordinary rotary vibrating screen with an ultrasonic transducer system added. The ultrasonic transducer system makes the screen vibrate at high frequency. , It is used when the production process requires high output. And while achieving high-precision, high-mesh sieving, it can control a narrow particle size range. At present, it has been successfully used in fine materials of 200 mesh to 600 mesh.
Ultrasonic transducer is the core equipment of ultrasonic rotary vibrating screen, which can convert ordinary electric energy into ultra-high frequency ultrasonic (18 kHz) electric energy. During daily use, it may happen that the ultrasonic vibrator gets damp, the transducer vibrator catches fire, and ceramic materials Crack, vibrator degumming, etc.
The ultrasonic vibrator is damp: You can use a megohmmeter to detect the sensor connection plug. When testing the insulation resistance value, the insulation resistance is generally greater than 5 megohms. If the insulation resistance value does not reach this value, you can put the entire sensor in the oven and set the high temperature for 3 hours. Dry left and right, or dehumidify with a hair dryer until the insulation resistance value is normal;
The transducer vibrator catches fire, and the ceramic material is damaged: you can rely on the megohmmeter or visual inspection, and the damage of disconnecting the vibrator will not affect the normal use of other vibrators;
Vibrator degumming: This phenomenon is mainly due to the long service life of the transducer, which can continue to be used after rebonding.
If you have questions about the ultrasonic vibrating screen, you can contact us, and the professional technicians of Dayong Company will give you the best solution.
