Factory Supplier High Efficiency Plastic Particles Rotary Vibrating Screen
Vibro screen has the characteristics of high screening accuracy, high efficiency and wide range of uses. At the same time, in terms of appearance design, the equipment does not occupy space, is convenient to move, has no dead ends, and is easy to thoroughly clean and disinfect. The screen mesh frame adopts a new type of mesh frame structure. Longer, easy to change the net, it only takes 3-5 minutes. In terms of work operation, the equipment is fully enclosed, dust does not fly, the screen is not blocked, the parts in contact with the material are all made of stainless steel, the material is automatically discharged, and continuous operation is possible
Vibro screen has the characteristics of high screening accuracy, high efficiency and wide range of uses. At the same time, in terms of appearance design, the equipment does not occupy space, is convenient to move, has no dead ends, and is easy to thoroughly clean and disinfect. The screen mesh frame adopts a new type of mesh frame structure. Longer, easy to change the net, it only takes 3-5 minutes. In terms of work operation, the equipment is fully enclosed, dust does not fly, the screen is not blocked, the parts in contact with the material are all made of stainless steel, the material is automatically discharged, and continuous operation is possible
★Basic rotary motion is similar to manual screening. Eccentricity adjustable from 25 to 40mm, low speed V-belt drive adjustable from 120 to 360rpm
★The residence time of each product can be adjusted toward the drive axis through the radial and cutting angles of the oscillating screen.
★ So build level and throw 3D tumbling motion. The material is evenly dispersed on the entire screen surface from the center to the outer edge, so as to spread in the axial direction in a spiral motion. The fine particles thus complete the entire sieving process.
The horizontal and vertical acceleration increases with the movement of the particles, and the particles close to the mesh size are successfully separated; the larger particles are transported to the outlet, and the flow is controlled by an adjustable guide device, which controls the flow rate. Another factor for material residence time
