316l 304 Stain Steel Pet Food Grain Plastic Pellet Small Sifters Machine/sand Soil Wheat Flour Automatic Sifter Machine 10 Ton
316l 304 Stain Steel Pet Food Grain Plastic Pellet Small Sifters Machine/sand Soil Wheat Flour Automatic Sifter Machine 10 Ton produced and sold by Xinxiang Dayong vibration equipment Co., Ltd. is 10 tons, which is specially used to screen food plastic grain / Sandy wheat flour.Installation, commissioning and use of linear vibrating screen:The equipment should be fixed on a special foundation and fixed by embedded bolts. If no special foundation is laid, an anti-vibration rubber sheet should be laid between the workbench and the equipment base, and a safe and reliable grounding protection line must be provided for the equipment before use.
Material: stainless steel, carbon steel
Model: DZSF515, DZSF520, DZSF525, DZSF1020, DZSF1025, DZSF1030
Price: $1000-$1500
The linear vibrating screen 316l 304 Stain Steel Pet Food Grain Plastic Pellet Small Sifters Machine/sand Soil Wheat Flour Automatic Sifter Machine 10 Ton is equipped with double vibrating motors, and the motors rotate synchronously in opposite directions. Therefore, the exciting force generated by the eccentric block is unified in the direction perpendicular to the motor shaft, and canceled in the direction parallel to the motor shaft, so that the motion trajectory is linear. There is an inclination angle between the two sieve plates. Under the combined force of excitation force and material gravity, these materials are thrown up and jump straight forward along the screen surface to achieve the purpose of filtration and classification.Note: After the equipment is installed in place, the device used to fix the screen body and the machine base during transportation must be removed before starting the machine.After the new screen machine is installed, it should be checked according to the following requirements:Check the insulation resistance of the vibration motor winding to the ground. If it is less than 20MΩ, it must be dried before use.On the screen body and the upper and lower spring seats of the machine base, the springs should be completely embedded in the spring seats to ensure the balance of the screen body. The vibration part of the screen machine should not be rigidly connected or contacted with other objects outside the machine.
